Freephone 0800 019 5899

Econofix Flexible Tile Adhesive

Econofix™ is a rapid set, polymer reinforced, flexible tile adhesive designed for use with underfloor heating.

Product Features

  • Create bed of 1 – 20mm of adhesive
  • Eco friendly
  • Use with Econoboard™
  • Highly flexible
  • Rapid set
  • Designed for use with underfloor heating

Why Econofix™?

Econofix™ Rapid Set Flexible Adhesive is a professional and highly flexible wall and floor tile adhe-sive. Designed for use with underfloor heating and suitable for natural stone, fully vitrified, high density tiles such as porcelain, ceramics and mosaics.


Our technology has been developed as part of our commitment to the environment; in particular the use of sustainably sourced products within our manufactured materials.

Packaging & Storage

Econofix Rapid Set Flexible Adhesive is supplied in 25kg sacks, palletised (48) and shrink wrapped. When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture.

Applying Econofix™

The mixed Econofix™ is applied to the prepared surface with a trowel using a suitably sized notched trowel in straight ribs to create a ribbed adhesive bed. The tiles should be pressed into place with a twisting and sliding action to achieve full adhesive to tile transfer. For tiling to walls in dry internal locations the adhesive contact should be at least 65% of the back of the tile.

Stock No. Product Name Weight (Kg)
6008 Econofix White Tile Adhesive 25
6009 Econofix Grey Tile Adhesive 25

* Required Fields

Econofix™ Rapid Set Flexible Adhesive can be used to tile directly over an underfloor heating application or simply as wall tile adhesive. The eco friendly formula is anti-stain and water mark proof so is perfect for use in bathrooms or even swimming pools. Suitable for both domestic and commercial applications and is specifically designed for use with electric underfloor heating systems.

Document Name Download
Conformity:Conforms to the requirements of BS EN 12004 / 12002 C2 FT S1
Tensile strength: 6 hrs >0.50N/mm2
12 hrs >0.75N/mm2
24 hrs >1.00N/mm2
Transverse deformation:Classification S1 (deformation greater than or equal to 2.5mm and less than 5mm)
Application temperature:5°C to 25°C
Service temperature range:-20°C to +80°C
Bed thickness:Up to 20mm
Mixing ratio:5 litres of water to 20kg powder
Open time: 45 mins at 20°C
Set time:3 hrs at 20°C
Ready for grouting:3 hrs at 20°C
Fully load bearing:24 hrs at 20°C
Shelf life:12 months in cool dry area