The advantage of Thermorail™
Thermorail™ enhances the bathroom experience by gently warming your towels to add that little bit extra comfort and warmth to your bathroom. Our heated towel rails are designed to run on the lowest wattage possible, without compromising comfort, and feature a voltage regulator to prevent overheating and maintain optimum running temperature. Browse the picture gallery to view the range or scroll down to see the list of available models and technical data.
Features
- Wide range of styles available
- Premium quality 304 Stainless Steel
- Energy efficient – low wattage
- Dry electric element
- Available with concealed or exposed wiring
- Totally safe – all Thermorail™ models comply with safety standards
Benefits
- The perfect solution for your bathroom
- A product that you can rely on
- Low running costs
- Provides rapid, responsive heat to comfortably warm your towels
- Can fit seamlessly into your bathroom design
- Peace of mind and extra comfort in your bathroom
Easy Installation
Thermorail™ is wired directly into your existing electrical circuit and can be fixed with concealed wiring to fit seamlessly into your project with no visible electrics. The floor to ceiling model is designed for ceiling heights between 2300 – 3000mm and can be cut to size on site. The Floor Standing models can simply be plugged into an electrical socket – no wiring required. All of our Thermorail models come with a schematic diagram showing electrical connections and fixing guides making installation as quick and hassle free as possible.
Thermodrill™
We recommend the use of our Thermodrill™ bits specifically developed for easy drilling through tiled walls without fracturing or chipping the surrounding tile.
Boost Switch
Thermorail™ Boost Switch allows you to boost the heat for 4 different periods of time without having to remember to switch off. Thermorail™ will revert back to off mode after the selected amount of time thus reducing energy consumption and running costs.
Dress Rings
These dress rings fit around the fixing legs to ensure a uniform finish at the wall. Hides any cracks or damage that may occur on tiles during installation and adds an extra level of finish to your project.
You may also need
- Boost Switch
- Thermodrill
- Dress rings
- 12V Transformer
| Document Name | Download |
|---|
Thermorail 12V Single rails
Thermorail 12 Volt Heated Towel Rails are a modular system consisting of single rails allowing you to choose the spacing and angle of fitting. Typical spacing is 250mm but can be varied to meet your needs. Usually rails are installed in multiples of 3 or 4 but as many as required can be installed as a set. Transformers are supplied as a part of the package according to the number of rails used. 12V rails have completely concealed wiring – some pre-wiring in the wall cavity will be required. Rails are designed to operate at the same temperature as standard rails with the advantage of an added level of safety for use in wet areas. Right hand wiring is standard but can be swapped to left hand wiring if required (fees apply).
Thermorail SR - Straight with Round Bars
The SR range features 32mm round vertical rails with 20mm round horizontal rails. The straight design gives a sleek finish, suiting most environments. The SR range takes up minimum room whilst allowing plenty of room to hang towels.
Thermorail CR - Curved with Round Bars
The CR range features round 32mm vertical rails with 20mm curved horizontal rails, allowing more space for hanging towels and more airing space for drying.
Thermorail SS - Straight with Square Bars
Designed for modern bathrooms with square fittings, the SS range features 28mm square vertical rails with 18mm square horizontal rails. Minimum depth from the wall, these rails fit into tight spaces whilst allowing plenty of room to hang and dry towels.
Thermorail FS - Freestanding Rails
This sturdy Free Standing rail has 24mm upright rails and legs with adjustable feet and 18mm hori-zontal rails. Suitable in many situations, it takes up very little room and stores flat. Can be used to dry and warm towels or to warm clothes overnight. The cord length including plug is 1.2m.
Thermorail FC - Floor to Ceiling Rail
The round floor to ceiling ladder features 50mm round uprights with 22mm horizontal bars. Designed to fit ceiling heights of 2300-3000mm, it can be cut to size on site or cut to your specifications prior to despatch.
Thermorail SV - Swivel Rails
Ideal for bathrooms with limited wall space the swivel rails feature a 32mm round upright with 22mm diameter bars. The rails are made from stainless steel and are available with exposed (plug in) wiring only and have an on off switch on the rail for added convenience.
